Draining a Kenmore dishwasher is generally not a routine task since these appliances are designed to automatically pump out water at the end of each cycle. However, if you need to manually drain the dishwasher for maintenance or due to an issue, you can follow these steps:
Safety Precautions: Before attempting to drain the dishwasher, ensure the unit is turned off and disconnected from its power source for safety.
- Turn Off the Dishwasher:
- Make sure the dishwasher is turned off, and disconnect it from its power source. This ensures safety while working on it.
- Open the Dishwasher Door:
- Carefully open the dishwasher door. Be cautious, as there might be hot steam inside if the dishwasher was recently running.
- Remove Dishes and Excess Water:
- If there are any dishes or standing water inside the dishwasher, remove the dishes and use a towel or sponge to soak up and remove as much water as possible.
- Locate the Drain Filter:
- Most dishwashers, including Kenmore models, have a drain filter at the bottom of the dishwasher. This filter may need to be removed for access to the drain area.
- Remove the Drain Filter (if applicable):
- If your dishwasher has a removable drain filter, carefully take it out. This may involve unscrewing or unlatching the filter cover. Refer to your dishwasher’s user manual if you are unsure.
- Inspect the Drain Area:
- With the drain filter removed, you can access the drain area. Look for any debris, food particles, or foreign objects that may be blocking the drain. Remove any obstructions you find.
- Manually Remove Water:
- If there is still water in the dishwasher, you can use a plastic cup or container to scoop out the water and pour it into the sink.
- Clean and Replace the Drain Filter:
- If you removed the drain filter, clean it thoroughly under running water to remove any trapped debris. Once cleaned, securely put the filter back in its place.
- Close the Dishwasher Door:
- Close the dishwasher door securely.
- Turn On the Dishwasher:
- Plug the dishwasher back into its power source and turn it on. Run a short rinse cycle to check if the water drains properly. If it doesn’t drain correctly, there may be a more significant issue that requires professional attention.
Remember that manually draining a dishwasher is typically not necessary in regular operation, and it should only be done if you encounter a specific problem. If you experience persistent drainage issues or other problems with your Kenmore dishwasher, it’s advisable to consult the user manual for troubleshooting tips or contact Kenmore customer support or a professional appliance technician for assistance.