Draining gas from a fuel-injected Harley-Davidson motorcycle is not a common procedure but may be necessary for certain maintenance or storage situations. Here are the steps to drain gas from a fuel-injected Harley:
Materials You’ll Need:
- Safety goggles and gloves (for personal protection)
- Drain pan or suitable container
- Wrench or socket set (if necessary)
- Empty gasoline container (optional)
Steps:
- Safety First:
- Put on safety goggles and gloves to protect your eyes and hands.
- Work in a Well-Ventilated Area:
- Ensure that you are working in a well-ventilated outdoor space to avoid inhaling gas fumes.
- Turn Off the Ignition:
- Ensure that the motorcycle’s ignition is turned off.
- Locate the Fuel Tank Drain Plug:
- Find the drain plug or valve on the bottom of the fuel tank. The location can vary depending on the Harley-Davidson model and year.
- Prepare a Drain Pan:
- Place a drain pan or suitable container beneath the fuel tank to catch the gas as it drains.
- Open the Fuel Tank Drain Plug:
- Using a wrench or socket set, carefully open the fuel tank drain plug. Turn it counterclockwise to open it. Be cautious not to overtighten or damage the plug.
- Drain the Gas:
- Allow the gasoline to flow out of the fuel tank and into the drain pan. This may take a few minutes. If you have an empty gasoline container, you can use it to collect the gas for disposal or storage.
- Empty the Fuel Tank Completely:
- Ensure that you remove all the gasoline from the fuel tank. Some residual gas may remain, so make sure it’s as empty as possible.
- Dispose of the Gas Properly:
- Never pour old gasoline down a drain or onto the ground. Gasoline should be disposed of properly, following local regulations. Many auto parts stores or hazardous waste facilities accept old gasoline for disposal.
- Close the Fuel Tank Drain Plug:
- Once the fuel tank is empty, securely close the drain plug by turning it clockwise. Ensure it is properly sealed to prevent any future leakage.
- Turn On the Ignition:
- Turn on the motorcycle’s ignition. This may prime the fuel system, and you might hear the fuel pump running briefly.
Please note that draining the gas from a fuel-injected Harley-Davidson is not a routine procedure and should only be done when necessary, such as for long-term storage or maintenance work. If you have concerns about your motorcycle’s fuel system, it’s advisable to consult the Harley-Davidson service manual or contact a Harley-Davidson dealership for guidance or assistance.